1995 – 2000 Chrysler Cirrus, Dodge Stratus / Sebring AC Compressor
New Sanden TRS090 Air Conditioning A/C Compressor Complete With 6 Groove Clutch Assembly For Chrysler Cirrus, Sebring, Dodge Stratus, And Plymouth Breeze.
SKU: 100761 Part No: 30601N
Sanden TRS090 – 6 Groove Clutch 4.0″ Diameter, 2.45″ Gauge Line – Direct Mount (4 Boss) – Single Wire Coil Connector Black Oval
Compressor R&R labor time is .9 hours, not including evacuate & recharge.
A/C Compressor Removal & Installation:
1. Disconnect the battery negative remote cable. 2. Loosen and remove drive belt. 3. Disconnect compressor clutch wire lead. 4. Recover refrigerant system with R-134a recovery unit. 5. Remove refrigerant lines from compressor A/C Lines. 6. Remove compressor attaching bolts; Lower Attaching Bolts and Upper Attaching Bolts. 7. Remove compressor.
1. Position the compressor on the mount. 2. Install the compressor attaching bolts. Tighten bolts to 41 N·m (30 ft. lbs.) torque. 3. Install drive belt. 4. Install refrigerant hoses and new seals. 5. Connect the clutch wire. 6. Charge the system. 7. Connect the negative cable to the battery.
The Accumulator or Filter Drier should always be replaced when the Air Conditioning System is opened. ( see why ) The Orifice Tube, if equipped, should always be replaced and the Expansion Valve, if equipped, should at least be inspected for proper operation if not replaced. ( see why )